Serving the Fayetteville area  ·  (910) 748-5494  ·  Open Mon-Sun 7am-7pm
📞 (910) 748-5494 Free Quote

Metal Roofing in Wade, NC (28395) · Local Professionals

Fayetteville Metal Roofing · Fast response in Wade and the Fayetteville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+349Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Wade is a small farm town where the roofs take a beating from summer sun and storm wind, and most of the homes and outbuildings here still wear metal. If you live in Wade (28395), you know the look: corrugated panels on sheds and barns, standing seam on a few newer homes, and shingle roofs on the older houses that line the roads near the Cape Fear River.

We are Fayetteville Metal Roofing, and we serve Wade and the surrounding Cumberland County area from our base in Fayetteville. Homeowners here call us because we understand the local conditions: hot, humid summers, severe thunderstorms with hail and wind, and the occasional tropical storm that pushes through. We have worked on everything from tobacco barns to brick ranches, and we know that a metal roof in Wade needs to handle heat, wind, and the pine needles that drop from the longleaf and loblolly pines that shade so many yards.

Metal Roofing in Wade (28395)

Wade sits on the flat Coastal Plain edge of the Sandhills, and the ground here is sandy loam that drains quickly but can shift under heavy rain. Properties in Wade tend to be larger lots with farmhouses, sheds, and shops, and many have corrugated or R-panel metal roofs that have seen decades of sun and storm. The challenge here is not just the roof itself but the access: narrow driveways, tight spaces between buildings, and the need to work around farm equipment and animals. We also see a lot of older homes with low-pitched roofs and carports, where proper flashing and ventilation make all the difference. Our team is experienced with the specific demands of Wade, from the historic homes near the downtown blocks to the newer subdivision homes spreading out toward Gray's Creek and Stedman. We know that the heat and humidity can cause fasteners to back out and seams to separate, and we know how to fix those problems so they do not come back.

We have been serving Wade and the Fayetteville area for years, and we have built a reputation for honest work and clear communication. Whether you need a repair on a barn roof or a full replacement on your home, we treat your property like it is our own.

Our services in Wade

How a Job Works in Wade

Step 1: You call us at (910) 748-5494 or request a free estimate online. We schedule a time to come out to your Wade property, inspect the roof, and talk through your options. We will check for leaks, loose fasteners, and any storm damage, and we will give you a written estimate before any work begins.

Step 2: Once you approve the estimate, we schedule the work. In Wade, that often means coordinating with the local building department for permits, especially for a full replacement. We handle the paperwork and make sure the job meets code. If you live in a neighborhood with an HOA, we can help you navigate the design review process. On the day of the job, our crew arrives on time, protects your landscaping, and works efficiently to minimize disruption. We use quality materials and proven techniques to ensure your metal roof performs well for years.

Step 3: After the work is done, we clean up thoroughly. We remove all old materials, sweep the area, and make sure no nails or debris are left behind. We walk the job with you to make sure you are satisfied, and we do not consider the job complete until you are happy. We leave your property clean and your roof ready for whatever Wade weather brings.

Pricing for metal roofing in Wade depends on the size of your roof, the material you choose, and the condition of the existing structure. For a typical ranch home, metal roof installation starts around $8 per square foot, while standing seam runs about $10 per square foot. If you are replacing an existing roof, expect around $9 per square foot. For smaller jobs, like a repair or leak fix, we start at $450, and screw replacement or re-fastening starts at $750. Corrugated and ribbed panel roofing, common on sheds and barns in Wade, starts at $5.50 per square foot. We also offer metal roof over shingles (retrofit) starting at $7 per square foot, which can save you money on tear-off and disposal. Every roof is different, so we provide a free estimate after inspecting your property. Call us at (910) 748-5494 to get started.

My shed in Wade has corrugated metal panels that are rusting through. Can you match the existing panels or do I need a full replacement?
We can often source matching corrugated panels for sheds and barns in Wade, but if the rust is widespread, a full replacement may be more cost-effective. We will inspect the shed and give you honest advice on whether a repair or replacement makes sense. Many older sheds in Wade have 5V crimp or R-panel roofing, and we can match those profiles.
A storm just blew through Wade and lifted some panels on my roof. How quickly can you respond for emergency repair?
We prioritize storm damage calls in Wade and the surrounding area. Call us at (910) 748-5494, and we will schedule an inspection as soon as possible, often within 24 to 48 hours. We can tarp or secure the roof to prevent further damage and provide a written estimate for permanent repairs.
What is the typical cost to replace a metal roof on a 1,500 square foot home in Wade?
For a 1,500 square foot home, a basic corrugated or ribbed panel roof might start around $8,250 (at $5.50 per square foot), while standing seam could run around $15,000. These are ballpark figures. The actual cost depends on roof pitch, accessibility, and whether tear-off is needed. We provide a free estimate after inspecting your roof.
Do I need a permit to replace my roof in Wade, and can you help with the paperwork?
Yes, roofing permits are typically required for a full replacement in Wade. The exact requirements and fees are set by the local building department, and we recommend confirming with them directly. We handle the permit application process for you and ensure the work meets all applicable codes.
My neighbor's tree branches hang over my roof in Wade. Can I trim them, and does my HOA have a say in roof color?
You generally have the right to trim branches that overhang your property line, but it is best to check local ordinances and talk to your neighbor first. If you live in an HOA, they may have design guidelines for roof color and material. We can provide samples and documentation to help with HOA approval.
Are you fully insured for roofing work in Wade, including workers' compensation?
Yes, we are fully insured with general liability and workers' compensation coverage. This protects you and your property in case of an accident on the job.
How often should I inspect my metal roof in Wade, and what should I look for after a storm?
We recommend an annual inspection, especially after storm season. Look for loose or missing fasteners, dented panels, and signs of leaks around flashing and seams. In Wade, pine needles and debris can accumulate in valleys and gutters, so keep those clear. If you see anything unusual, call us at (910) 748-5494 for a professional assessment.
Why choose us?

Trusted professionals in Fayetteville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Fayetteville

All your work handled by qualified professionals in Fayetteville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

349+ Verified Client Reviews in Fayetteville

⭐⭐⭐⭐⭐ 4.9/5 · 349 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Fayetteville · Response within 24h · No commitment · ☎ (910) 748-5494

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Fayetteville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm