Serving the Fayetteville area  ·  (910) 748-5494  ·  Open Mon-Sun 7am-7pm
📞 (910) 748-5494 Free Quote

Metal Roofing in Stedman, NC (28391) · Local Professionals

Fayetteville Metal Roofing · Fast response in Stedman and the Fayetteville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+349Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Stedman is a small town where the lots are wide, the pines are tall, and most homes have a shed or shop out back with a metal roof that has seen better days. The housing mix runs from older farmhouses and brick ranches along Autryville Road to newer vinyl-and-brick subdivisions off Maxwell Road, and the sandy loam ground drains fast but the summer storms hit hard. If you live in Stedman, you already know that wind and humidity are the two things that test a roof.

Homeowners in 28391 call Fayetteville Metal Roofing because we understand the local building stock: exposed-fastener panels on barns and outbuildings, standing seam on newer homes, and plenty of shingle roofs that are due for a metal upgrade. We are based in Fayetteville, just a short drive up NC-210, and we know the back roads and the permit office. When a storm rolls through, we are close enough to respond quickly and familiar enough with Stedman to get the job done right.

Metal Roofing in Stedman (28391)

Stedman sits on the edge of the Sandhills, where the ground is sandy loam and the pines drop needles and limbs all year. Most properties here have a main house plus at least one outbuilding, whether it is a detached garage, a tobacco barn, or a shop with corrugated panels. Those exposed-fastener roofs are the ones we see most often for screw replacement and re-fastening, because the washers dry out and back out after a few summers of heat and wind. The flat lots and wide setbacks usually make access easy, but we still watch for power lines, septic fields, and tight drives when we stage materials. Drainage is generally good, but we check gutters and downspouts on every estimate because a metal roof sheds water fast and the runoff has to go somewhere.

Our team has worked on everything from historic tin roofs in Fayetteville to modern standing seam in the new subdivisions out here. We know how to match panel profiles and colors to the existing look, and we know when a repair makes sense versus a full replacement. Whether it is a small leak repair or a complete retrofit over shingles, we bring the same approach: inspect, explain, and fix it right.

Our services in Stedman

How a Job Works in Stedman

Step 1: You call (910) 748-5494 or request a free estimate online. We schedule a time to come out to your property in Stedman, inspect the roof and attic, and talk through what you are seeing. We check for loose fasteners, rust, flashing gaps, and any storm damage, then give you a written estimate with options and clear pricing.

Step 2: Once you approve, we pull the required permits through the local building department (Cumberland County or the City of Fayetteville, depending on your address) and schedule the work. For most Stedman jobs, we can start within a week or two, weather permitting. We protect your landscaping, stage materials in the driveway or yard, and keep the site organized. If your home is in an HOA, we help with the paperwork and color approval before we order materials.

Step 3: When the work is done, we clean up thoroughly, including a magnet sweep for nails, and walk the roof with you to make sure you are satisfied. We do not leave until you have a clear understanding of what was done and how to maintain it.

Pricing in Stedman depends on the size and pitch of your roof, the material you choose, and how much prep work is needed. For a typical single-story ranch, metal roof installation starts around $8 per square foot, standing seam around $10, and a retrofit over existing shingles around $7. If you have an outbuilding with corrugated panels, screw replacement and re-fastening starts at $750, and a simple leak repair is usually around $450. Larger homes with complex roofs or multiple layers of old shingles will cost more, and emergency repairs after a storm may carry a premium. We give free estimates and explain all the factors before you commit. Call (910) 748-5494 to schedule yours.

My barn off Autryville Road has corrugated metal panels with screws that keep backing out. Can you fix that without replacing the whole roof?
Yes. That is one of the most common jobs we do in Stedman. We replace the old screws with new ones that have neoprene washers, check for enlarged holes, and re-fasten any panels that are loose. If the panels are still solid, a screw replacement usually solves the problem for years. We start at $750 for screw replacement and re-fastening, and we will tell you if a panel replacement is needed instead.
A storm just took off some panels on my roof in Stedman. How fast can you get out here?
We prioritize storm damage calls and can usually get to Stedman within 24 to 48 hours for an inspection. Call us at (910) 748-5494 and we will schedule a free inspection, tarp any active leaks if needed, and give you a repair estimate. We work with insurance claims and can provide documentation, but coverage depends on your policy.
What does a metal roof cost for a typical three-bedroom ranch in Stedman?
For a 1,500 to 2,000 square foot ranch with a simple gable roof, you are looking at roughly $12,000 to $20,000 for installation, depending on the material. Standing seam runs higher, around $15,000 to $25,000. A retrofit over existing shingles can save a few thousand. We give free estimates with exact numbers after inspecting your roof.
Do I need a permit to replace my roof in Stedman, and who handles it?
Yes, a permit is typically required for a full roof replacement or re-roof in Stedman. The permit is issued by Cumberland County or the City of Fayetteville, depending on your address, and the rules can vary. We handle the permit application and inspection coordination as part of the job. We always defer to the local building department for the final word on requirements.
My neighbor and I share a property line, and I want to make sure my new metal roof does not cause drainage issues on their side. What should I do?
We can adjust gutter placement and downspout routing to keep water on your property. If there is an HOA, we also help with approval of panel profile and color. For property line concerns, we recommend checking your plat and talking with your neighbor before work starts. We will work with you to avoid disputes.
Are you fully insured for work at my Stedman home?
Yes. We carry general liability insurance and workers' compensation coverage for every job. You can have peace of mind knowing our team is covered while on your property.
What maintenance does a metal roof need in Stedman's climate?
Metal roofs are low maintenance, but in our humid summers and windy storms, we recommend an annual inspection. Check for loose screws, debris in gutters, and any signs of rust or flashing gaps. After a major storm, look for lifted panels. We offer free inspections and can handle any needed repairs. Keeping the roof clean and fasteners tight will help it last decades.
Why choose us?

Trusted professionals in Fayetteville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Fayetteville

All your work handled by qualified professionals in Fayetteville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

349+ Verified Client Reviews in Fayetteville

⭐⭐⭐⭐⭐ 4.9/5 · 349 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Fayetteville · Response within 24h · No commitment · ☎ (910) 748-5494

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Fayetteville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm