Serving the Fayetteville area  ·  (910) 748-5494  ·  Open Mon-Sun 7am-7pm
📞 (910) 748-5494 Free Quote

Metal Roofing in Lumberton, NC (28359) · Local Professionals

Fayetteville Metal Roofing · Fast response in Lumberton and the Fayetteville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+349Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Lumberton is a river town where the Lumber meets the Cape Fear, and the housing stock tells that story: older mill cottages and Victorians near downtown, brick ranches off Roberts Avenue, and newer subdivisions out toward Exit 22 and the hospital corridor. The flat, sandy ground and thick pine canopy are great for shade but hard on roofs, especially after a hurricane season sends water and limbs down.

Homeowners in 28359 call Fayetteville Metal Roofing because we know what Lumberton roofs go through. From the historic blocks near the Robeson County Courthouse to the long-established neighborhoods off Carthage Road, we have seen how wind-driven rain finds every failed fastener and flashing gap.

Metal Roofing in Lumberton (28359)

Lumberton sits on flat Coastal Plain ground with sandy loam that drains fast but shifts under repeated flooding. That matters for roof work because access and staging are usually easy, but the real challenge is what happens above: tall loblolly pines and water oaks drop limbs and needles that clog valleys and gutters, and hurricane remnants push water sideways into seams and chimney flashing. Older homes near downtown often have steep pitches and multiple roof planes, while the brick ranches and split-levels closer to I-95 have low slopes where standing water can sit after a storm. We plan every job around those conditions, from panel profile choice to how we tie in gutters that can handle pine needles.

Our team has worked across Robeson and Cumberland counties for years, and we treat Lumberton like our own backyard. Whether it is a full replacement on a 1960s ranch or a repair on a metal roof that has taken a few too many storms, we bring the same approach: inspect first, explain what we find, and fix it right.

Our services in Lumberton

How a Job Works in Lumberton

Step 1: You call us at (910) 748-5494 or request a free estimate online. We schedule a time to walk your property, get on the roof if it is safe, and check fasteners, seams, flashing, and decking. We take photos and give you a written scope with pricing before any work starts.

Step 2: Once you approve, we pull the required roofing permit with the City of Lumberton or Robeson County, order materials, and schedule the crew. Most residential replacements take one to three days depending on size and weather. We protect landscaping, keep the site organized, and coordinate with any HOA design requirements if your neighborhood has them.

Step 3: We clean up every day and do a final walkthrough with you. That means magnet sweeping for nails, hauling off old materials, and confirming the work matches the scope. We do not leave until you are satisfied.

Pricing in Lumberton depends on the size and pitch of your roof, how many layers are coming off, and whether there is storm damage to address. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and a retrofit over existing shingles around $7. Repairs and leak fixes start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. Coating and painting start at $2.50 per square foot, and gutters for metal roofs start at $9 per linear foot. Every roof is different, so call (910) 748-5494 for a free estimate and a clear number.

My house near downtown Lumberton has an original tin roof that is rusting at the seams. Can you repair it or does it need replacement?
We see a lot of older tin and standing seam roofs in the historic blocks near the courthouse. If the rust is isolated to seams and fasteners, we can often clean, treat, and re-seal those areas, then replace any compromised panels. If the metal is thin across large sections or the decking underneath is soft, replacement makes more sense. We will give you an honest assessment after a free inspection.
A storm just took off shingles and bent my metal panels near Exit 22. How fast can you get out?
We prioritize active leaks and storm damage in Lumberton. Call (910) 748-5494 and we will schedule an inspection as soon as possible, often within a day or two depending on call volume. We can tarp or secure the roof to prevent further water intrusion while we prepare a repair or replacement estimate for your insurance documentation.
What does a typical metal roof replacement cost for a 1,800 square foot ranch in Lumberton?
For a single-story ranch with a simple gable, you are usually looking at $12,000 to $18,000 for a standard metal roof replacement, depending on panel type, tear-off, and any decking repairs. Standing seam runs higher. We give a firm written price after measuring and inspecting, so you are not guessing.
Do I need a permit from the City of Lumberton to replace my roof?
Yes, the City of Lumberton and Robeson County generally require a roofing permit for a full replacement or re-roof, and inspection requirements vary. We handle the permit application and inspections as part of the job. We always defer to the local building department for the final word on what is required for your address.
My neighbor's pine trees drop limbs on my roof, and our HOA has rules about metal roof colors. Can you help with approval?
We can provide product specifications and color samples for your HOA submission, and we are familiar with common architectural review requirements in Lumberton subdivisions. As for the trees, we can recommend gutter guards and trim back overhanging limbs where allowed. Property line issues are between you and your neighbor, but we will document any damage we find.
Are you fully insured for roof work in Lumberton?
Yes. We carry general liability insurance and workers' compensation coverage for every job.
What maintenance should I do on my metal roof in Lumberton to get ready for hurricane season?
Before storm season, clean pine needles and debris from valleys and gutters, check that fasteners are tight and not backed out, and look for any loose flashing around chimneys and skylights. We offer free inspections and can replace missing or rusted screws. If your roof is older, a coating can extend its life. Call us at (910) 748-5494 to schedule a pre-season check.
Why choose us?

Trusted professionals in Fayetteville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Fayetteville

All your work handled by qualified professionals in Fayetteville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

349+ Verified Client Reviews in Fayetteville

⭐⭐⭐⭐⭐ 4.9/5 · 349 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Fayetteville · Response within 24h · No commitment · ☎ (910) 748-5494

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Fayetteville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm