Serving the Fayetteville area  ·  (910) 748-5494  ·  Open Mon-Sun 7am-7pm
📞 (910) 748-5494 Free Quote

Metal Roofing in Red Springs, NC (28377) · Local Professionals

Fayetteville Metal Roofing · Fast response in Red Springs and the Fayetteville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+349Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Red Springs is a small town where the housing stock tells a story, from the older brick and frame homes near downtown to the farmhouses and barns out on the rural edges. Many of those roofs are original or near the end of their life, and that is where we come in. We install, repair, and replace metal roofs for homeowners and property managers in Red Springs and across the Fayetteville area.

If you live in Red Springs (28377) and your shingle roof is showing its age, or you have a metal roof that is leaking or damaged, call Fayetteville Metal Roofing. We know the local housing stock, from the historic homes near the Red Springs downtown to the brick ranches and farmhouses that make up so much of this community. Our team provides free inspections and honest estimates, and we are fully insured for your protection.

Metal Roofing in Red Springs (28377)

Red Springs sits in Robeson County, just south of the Cumberland County line, and the housing here reflects that rural, small-town character. You will find older brick and frame homes with worn shingle roofs, many of them with low-slope or complex rooflines that have seen better days. The soil is sandy loam, which drains well but can shift slightly over time, and the flat terrain means water pools in low spots after heavy rain. Many properties have mature pines and hardwoods that drop needles, cones, and limbs, which can clog gutters and damage roofing. We also see a fair number of farmhouses, tobacco barns, and outbuildings with corrugated metal roofs that need repair or replacement.

Our team has worked on roofs throughout Red Springs and the surrounding areas, from the older neighborhoods near the Red Springs High School to the rural properties out on Highway 211. We understand the specific challenges of roofing here, from tight lot access in town to the wide-open spaces of the countryside. Whether you need a full metal roof installation, a repair, or a roof-over, we have the experience to get it done right.

Our services in Red Springs

How a Job Works in Red Springs

Every job starts with a free on-site assessment. We will come out to your Red Springs property, inspect your roof, and talk with you about what you need. We will check for leaks, damaged panels, and any underlying issues, and then give you a clear, written estimate. We will also discuss your options, including metal roof over shingles if your existing roof is a candidate for a retrofit.

Once you approve the estimate, we schedule the work. In Red Springs, we often deal with older homes where the roof structure may need some attention, and we will handle any necessary repairs before installing the new metal roof. We also coordinate with the local building department for permits, which are typically required for a full replacement or re-roof. If you live in a historic district or HOA, we will help you understand any design review requirements for panel profile and color.

When the job is done, we clean up thoroughly and walk through the finished work with you. We make sure you are satisfied and that your property is left clean. We haul away all old materials and leave your yard as we found it, minus the old roof.

Pricing for metal roofing in Red Springs depends on the size and complexity of your roof, the material you choose, and the condition of your existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are considering a metal roof over shingles, that starts at $7 per square foot. Repairs start at $450, and screw replacement and re-fastening starts at $750. We also offer metal roof coating and painting from $2.50 per square foot, which can extend the life of an existing metal roof. For a free estimate tailored to your Red Springs home, call us at (910) 748-5494.

My Red Springs home has an older shingle roof that is starting to curl and lose granules. Can I put a metal roof over it?
In many cases, yes. A metal roof over shingles, also called a retrofit, can be a cost-effective option if your existing roof has only one layer of shingles and the decking is in good condition. We will inspect your roof to confirm it meets local code requirements for a roof-over, which typically limit the number of existing layers. This can save you the cost of tear-off and disposal, and it is a popular choice for older homes in Red Springs.
A storm just blew through Red Springs and lifted some panels on my metal roof. Can you help?
Yes, we handle storm and wind damage repair for metal roofs. We offer free inspections to assess the damage and provide a written estimate for repairs. If your roof is actively leaking, we can also provide temporary emergency repairs to prevent further damage. Call us at (910) 748-5494 to schedule an inspection.
What is the typical cost for a metal roof repair in Red Springs?
Metal roof repairs in Red Springs start at $450 for common issues like flashing repairs or small leak fixes. The final cost depends on the extent of the damage, the type of metal roof you have, and access to the affected area. We provide free estimates so you know the price before we start.
Do I need a permit for a metal roof installation in Red Springs?
Yes, roofing permits are commonly required for a full replacement or re-roof in Red Springs. The requirements and fees vary by jurisdiction, so we always check with the local building department before starting work. We handle the permit application process for you and ensure the work meets all applicable codes.
My neighbor and I are disputing the property line, and I am worried about where my new roof will drain. What should I do?
Property line disputes can be tricky. We recommend resolving the boundary issue with your neighbor before work begins. We can design your roof drainage to direct water away from the property line and onto your own lot. If you are in an HOA, we can also help you understand any rules about drainage and roof design.
Are you fully insured for roofing work in Red Springs?
Yes, Fayetteville Metal Roofing is fully insured, carrying both general liability and workers' compensation insurance. This protects you and your property in the unlikely event of an accident during the job. We are happy to provide proof of insurance upon request.
What kind of maintenance does a metal roof need in Red Springs?
Metal roofs are low maintenance, but in Red Springs, you should periodically check for loose or missing fasteners, especially after storms, and keep gutters and roof valleys clear of pine needles and leaves. We recommend an annual inspection to catch small issues before they become leaks. We also offer screw replacement and re-fastening services to keep your roof secure.
Why choose us?

Trusted professionals in Fayetteville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Fayetteville

All your work handled by qualified professionals in Fayetteville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

349+ Verified Client Reviews in Fayetteville

⭐⭐⭐⭐⭐ 4.9/5 · 349 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Fayetteville · Response within 24h · No commitment · ☎ (910) 748-5494

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Fayetteville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm