Licensed & Insured, in Fayetteville and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Fayetteville
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (910) 748-5494 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Fayetteville and surrounding areas · On-site visits included · Free estimate within 24h
Fayetteville Metal Roofing is a team of local certified professionals based in Fayetteville. We respond quickly in Fayetteville and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (910) 748-5494⭐⭐⭐⭐⭐ 4.9/5 · 349 verified Google reviews
“Had them put a new metal roof on our hay barn out past Raeford and they knocked it out in two days with a four-man crew. Straight lines, no leaks, and they hauled off every last scrap of old tin. Exactly what I needed before the fall rains.”
Commercial & Agricultural Metal Roofing
“We were dreading tearing off the old shingles on our porch roof, but they did the retrofit right over them and saved us a ton of money. Finished in a day and a half and you can't tell there was ever anything else up there.”
Metal Roof Over Shingles (Retrofit)
“They re-roofed the equipment shed next to our fields with corrugated panels and it turned out solid as a rock. Only gripe is they showed up a couple hours later than the window they gave me, but the work itself was top notch and the price was fair.”
Corrugated & Ribbed Panel Roofing
“Our brick house had the original shingles from the 80s and we finally went standing seam. The crew was meticulous, even wrapped the chimney flashing like it was their own house. Neighbors have already asked me who did it.”
Standing Seam Metal Roofing
“Every hard rain we'd get a stain on the ceiling right next to the brick chimney, and two other outfits just smeared caulk on it. These guys actually pulled the old flashing, redid it properly, and we've been bone dry through three storms since.”
Flashing, Chimney & Skylight Repair
“Brand new build and we went with metal from the start. The install crew was in and out in three days, cleaned up so well you couldn't even find a screw in the yard, and the inspector didn't flag a single thing. Honestly relieved it went that smooth.”
Metal Roof Installation
“Tore off our old rusted panels and replaced the whole roof on our place out in Parkton. Two days, fair price, and they even re-fastened a few loose pieces on the shed while they were at it. Good honest crew.”
Metal Roof Replacement
“Called them out for an inspection before we bought a house with a metal roof and a big chimney. They gave me a written rundown of the flashing and fastener condition and didn't try to upsell me on anything I didn't need. Small thing, but they were a little slow to send the report over.”
Metal Roof InspectionReal photos of our work in Fayetteville · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener panel install | Starting at $8/sq ft | Includes tear-off, synthetic underlayment and standard flashing; pitch and roof complexity move the price. |
| Standing seam install | Starting at $12/sq ft | Concealed fasteners and raised seams; panel width, seam height and historic district detailing raise the cost. |
| Metal shingle or stone-coated steel | Starting at $11/sq ft | Includes stamped or coated panels and trim; steep pitches and complex hips add labor. |
| Retrofit over existing shingles | Starting at $9/sq ft | Includes prep and new panels over one shingle layer; code limits and deck condition affect eligibility. |
| Large or complex roof | On estimate | Multiple valleys, chimneys and steep pitches need an on-site measurement before we quote a number. |
| Estimate | Free | Response within 24 hours at (910) 748-5494, no obligation to book the job. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard 24-gauge snap-lock standing seam | Starting at $10/sq ft | Includes panels, concealed clips, underlayment, and basic trim over a prepared deck. |
| Mechanically seamed (double-lock) standing seam | Starting at $13/sq ft | Includes mechanical seaming for higher wind resistance, best for low-slope or exposed roofs. |
| Standing seam with tear-off and decking repair | Starting at $14/sq ft | Includes removal of old shingles, disposal, and replacement of rotted decking as needed. |
| Copper or specialty metal standing seam | On estimate | Material cost and custom forming vary widely, so we need to see the roof before quoting. |
| Travel | Included | In Fayetteville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (910) 748-5494, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener panel replacement | Starting at $9/sq ft | Includes tear-off, decking inspection, underlayment and new corrugated or ribbed panels with fasteners. |
| Standing seam replacement | Starting at $13/sq ft | Concealed fasteners, raised seams and full flashing package; pitch and roof complexity move the number. |
| Metal shingle or stone-coated steel | Starting at $12/sq ft | Stamped or granule-coated panels for historic and HOA homes; dormers and valleys add labor. |
| Complex or large-scale job | On estimate | Multiple roof levels, steep pitch or heavy decking repair need an on-site walk before pricing. |
| Travel | Included | in Fayetteville and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (910) 748-5494, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel over one shingle layer | Starting at $7/sq ft | Includes slip sheet, standard trim and cleanup on a sound single-layer deck. |
| Standing seam over existing shingles | Starting at $11/sq ft | Concealed fasteners and raised seams; pitch and panel width move the price. |
| Metal shingle or stone-coated steel retrofit | Starting at $10/sq ft | Textured system with period profile; dormers and valleys add labor. |
| Deck repair or second-layer removal | On estimate | Soft sheathing or code layer limits need an on-site look before pricing. |
| Travel | Included | In Fayetteville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (910) 748-5494, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor spot repair | Starting at $450 | Covers inspection, one panel repair or re-fastening run, and reseal on a single-story roof. |
| Leak repair with flashing | Starting at $650 | Includes flashing rebuild at a chimney, wall or skylight plus leak testing, priced by access. |
| Multiple panel replacement | Starting at $900 | Covers several damaged panels and re-fastening, with price driven by panel count and roof pitch. |
| Storm damage repair | On estimate | Needs an on-site look because scope depends on how many panels, seams and fasteners failed. |
| Travel | Included | in Fayetteville and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (910) 748-5494, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Fastener and washer replacement | Starting at $450 | Covers pulling failed screws, installing correct-length fasteners with new washers, and a water test on the repaired run. |
| Flashing or pipe boot rebuild | Starting at $550 | Includes rebuilding a pipe boot, wall transition or small flashing detail, with the price moving on roof pitch and access. |
| Seam and lap repair | Starting at $650 | Cleaning and resealing or mechanically closing separated seams, with cost driven by panel type and how many joints failed. |
| Panel section replacement | On estimate | Needs an on-site look to match panel profile, color and gauge before any number is given. |
| Emergency tarping | Starting at $350 | Wind-rated tarp secured over active water entry after storm or hurricane-remnant damage, credited toward the permanent repair. |
| Travel | Included | In Fayetteville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (910) 748-5494, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single-slope re-fastening | Starting at $750 | Inspection, fastener replacement, and water test on one typical slope or section |
| Full-roof re-fastening | Starting at $1,450 | Every fastener on the roof replaced, priced by square footage and fastener count |
| Oversized fastener reset | Starting at $950 | Upsized screws for stripped or wallowed holes on older corrugated and R-panel roofs |
| Closure and trim reset | Starting at $850 | Ridge, eave, and rake closures re-seated and trim re-anchored after wind damage |
| Complex or large-scale job | On estimate | Steep pitch, two stories, or rusted panels need an on-site look before pricing |
| Estimate | Free | Response within 24 hours at (910) 748-5494, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel install | Starting at $5.50/sq ft | Includes panels, underlayment, trim and fasteners on a standard pitch roof. |
| Ribbed R-panel install | Starting at $6.25/sq ft | Includes R-panel, closures and trim; pitch and roof complexity raise the rate. |
| Re-screw and re-fastening | Starting at $1.75/sq ft | New screws and sealing washers on sound panels; panel count and access affect price. |
| Panel over existing shingles | On estimate | Requires a deck and layer-count check before any number is given. |
| Travel | Included | In Fayetteville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (910) 748-5494, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Architectural shingle profile metal roof | Starting at $9/sq ft | Includes tear-off, synthetic underlayment, standard flashing and interlocking steel shingle panels; steep pitch and deck repair raise the price. |
| Slate or shake profile metal roof | Starting at $11/sq ft | Includes premium textured panels and detailed trim work; complex hips, valleys and dormers on Haymount historic homes push it higher. |
| High-wind interlock system | Starting at $12/sq ft | Includes heavier-gauge panels and reinforced perimeter fastening for homes exposed to tropical storm gusts in Hope Mills and Eastover. |
| Complex or large-scale roof | On estimate | Steep multi-story roofs, heavy tree cover, tight access and unknown deck condition need an on-site look before we quote a number. |
| Travel | Included | In Fayetteville and surrounding Cumberland County areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (910) 748-5494, with no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel, simple gable roof | Starting at $9/sq ft | Includes panels, underlayment, and standard trim on an accessible single-story roof. |
| Stone-coated steel, cut-up or steep roof | Starting at $12/sq ft | Covers dormers, multiple valleys, and steep pitches that raise labor and material waste. |
| Tear-off and redeck before install | On estimate | Old layers come off, sheathing is repaired, and the deck is prepped for panels. |
| Over existing shingles (retrofit) | On estimate | Panels go over a sound single layer where code and deck condition allow. |
| Travel | Included | In Fayetteville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (910) 748-5494, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Aluminum accent roof (porch, bay, dormer) | Starting at $20/sq ft | Includes panels, underlayment and flashing; access and height above grade move the price. |
| Zinc panel roofing | Starting at $28/sq ft | Includes concealed-fastener panels and trim; curved or complex geometry adds fabrication time. |
| Copper standing seam | Starting at $38/sq ft | Includes soldered seams and custom trim; historic profile matching and scaffolding raise the figure. |
| Custom fabrication (turret, cupola, curved porch) | On estimate | Requires on-site measurement and shop drawings before a number is given. |
| Travel | Included | In Fayetteville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (910) 748-5494, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic reflective coating | Starting at $2.50/sq ft | Wash, prime, and one reflective coat on a clean, lightly chalked metal roof. |
| Rust treatment and topcoat | Starting at $3.25/sq ft | Adds rust converter and pigmented topcoat for surface rust at fasteners and laps. |
| Elastomeric system with fastener work | Starting at $4.50/sq ft | Thicker film, screw replacement, and two coats for older standing seam and corrugated roofs. |
| Steep pitch or heavy tree cover | On estimate | Steep two-story roofs and heavy pine or oak shade need an on-site look before pricing. |
| Travel | Included | in Fayetteville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (910) 748-5494, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single penetration reflash (pipe boot, vent collar) | Starting at $600 | Includes removal of old flashing, new boot or collar, sealant, and a water test at the penetration |
| Chimney reflash with new counterflashing | Starting at $950 | Includes step and counterflashing bent in-house, plus inspection of decking around the chimney base |
| Skylight curb rebuild | Starting at $1,200 | Includes new curb flashing, sill pan, corner sealing, and replacement of any soft decking found |
| Valley metal replacement | Starting at $900 | Includes needle and debris cleanup, new valley pan, and inspection of surrounding panels or shingles |
| Complex or large-scale job | On estimate | Multiple penetrations, steep pitch, tall chimney, or rotted decking need an on-site look before a number |
| Estimate | Free | Response within 24 hours at (910) 748-5494, with no obligation to book the work |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Guard run over a walkway or doorway | Starting at $1,200 | Includes layout, guards, and sealed fasteners; roof height and pitch move the price up. |
| Full eave and gutter line protection | Starting at $1,850 | Covers a full run plus gutter hanger check; linear footage and panel type drive the total. |
| Standing seam clamp installation | Starting at $1,450 | Non-penetrating seam clamps sized to your panel; seam spacing and roof access affect cost. |
| Complex or large-scale job | On estimate | Multiple release zones or steep multi-story roofs need an on-site look before a number. |
| Travel | Included | In Fayetteville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (910) 748-5494, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof, flashing and fastener check with photo documentation for your insurance file |
| Minor repair (seams, screws, flashing) | Starting at $350 | Resealing seams, resetting fasteners and repairing flashing on isolated storm damage |
| Panel or section replacement | Starting at $900 | Depends on panel profile, number of panels and roof pitch or access difficulty |
| Widespread storm or hail damage | On estimate | Needs an on-site look to scope partial versus full replacement and document the claim |
| Travel | Included | In Fayetteville and surrounding areas, with no separate call-out or mileage fee |
| Estimate | Free | Response within 24 hours at (910) 748-5494, with no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Routine metal roof inspection | Free estimate | On-roof visual check of panels, fasteners, seams and flashing with a verbal summary on site |
| Full written inspection report | Starting at $249 | Photo documentation, priority repair list and remaining service life estimate for buyers or insurance |
| Leak trace and flashing inspection | Starting at $325 | Focused inspection of chimneys, skylights, valleys and sidewalls with water testing where needed |
| Large or steep-roof property | On estimate | Two-story, steep-pitch or multi-building roofs need an on-site look before a number is given |
| Travel | Included | In Fayetteville and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (910) 748-5494, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless K-style aluminum gutter | Starting at $9/linear ft | Includes 5-inch trough, hangers, and basic downspouts; 6-inch and screens add cost. |
| Standing seam clamp system | Starting at $14/linear ft | Seam clamps that grip the panel without piercing it, plus hangers and downspouts. |
| Half-round with hidden hangers | Starting at $16/linear ft | Traditional profile for Craftsman and historic homes; fascia repair priced separately. |
| Debris screens and oversized downspouts | Starting at $4/linear ft add-on | Screens and 3x4 downspouts for pine-heavy lots in Stedman and Raeford. |
| Two-story or steep-pitch access | On estimate | Ladder staging, steep pitch, and long runs need an on-site look before quoting. |
| Travel and estimate | Included, free | No call-out fee in Fayetteville and nearby towns; response within 24 hours. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Barn or shed re-roof (exposed fastener) | Free estimate | Includes inspection, measurements and written scope; roof size and purlin condition move the price most |
| Small commercial building (under 2,000 sq ft) | Starting at $8,500 | Covers panel install, fasteners, ridge and basic flashing; slope and penetration count change the total |
| Standing seam commercial roof | On estimate | Concealed-fastener systems need on-site review of slope, span and flashing before pricing |
| Repair or re-fastening | Starting at $450 | Includes leak diagnosis, fastener replacement and sealant; access and panel count affect the rate |
| Travel | Included | In Fayetteville and surrounding Cumberland County areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (910) 748-5494, no obligation to book |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Fayetteville need a crew that understands the local housing stock and the weather that tests it. Fayetteville Metal Roofing is that local resource, a network of licensed, bonded, and insured contractors who install, replace, re-roof, and repair metal roofing across the Cape Fear region. From the historic Victorians and Craftsman homes of Haymount to the brick ranches of Massey Hill and the newer subdivision homes spreading through Gray's Creek, we match the right metal system to the roof, the pitch, and the budget.
Our work covers the full range of local conditions: steep pitches on older homes, heavy pine and oak cover that drops needles and limbs, and the large stock of 15 to 30 year old screw-down roofs whose fasteners are due for service. We serve Fayetteville, Hope Mills, Spring Lake, Eastover, Raeford, and the surrounding communities. Whether you need a Metal Roof Installation or a straight answer about repairing what you have, start with a conversation and a free estimate.
Metal roofs fail for predictable reasons, and most of them trace back to the fasteners and the flashing. On exposed-fastener roofs, the EPDM sealing washer under each screw dries, shrinks, and cracks over time. Once that washer fails, water reaches the hole and the fastener backs out, which is the number one cause of leaks on 15 to 30 year old screw-down roofs. Seams can separate as the panels expand and contract with thermal movement. Pipe boots, chimney flashing, skylight curbs, and valley metal can pull loose or corrode. Wind can lift and peel panels after a severe thunderstorm or tornado remnant, and fallen pine limbs can puncture a panel outright.
Ignoring a small leak is expensive. Water often tracks along purlins and decking far from the point of entry, so by the time a stain shows on the ceiling, sheathing may already be rotting and insulation may be saturated. That is why we start with a careful inspection and give you the honest repair versus replace call. In many cases, a full Screw Replacement & Re-Fastening with new washered fasteners restores a watertight roof for a fraction of replacement cost. When the panels themselves are sound, that is the right answer, and we will say so.
For active leaks, separated seams, storm damage, or flashing failures, call (910) 748-5494 to schedule service. Our Metal Roof Leak Repair team traces the source, fixes it correctly, and documents what we found. If replacement is truly the better investment, we will explain why in plain terms, with no pressure and no storm-chaser tactics.
We install the systems that make sense for Fayetteville homes and outbuildings. Standing Seam Metal Roofing uses concealed clips and hidden fasteners for a clean, premium roof with no exposed screws to maintain. Corrugated & Ribbed Panel Roofing is the economical workhorse for barns, shops, sheds, and budget-minded homes. We also install Metal Shingle Roofing and Stone-Coated Steel Roofing for homeowners who want a traditional look, plus Copper & Specialty Metal Roofing for accents and historic profiles.
The honest comparison is simple: standing seam costs more up front but has no exposed fasteners to service, while screw-down costs less and needs its fasteners checked and replaced over its life. When the deck is sound, Metal Roof Over Shingles (Retrofit) can be a legitimate way to save on tear-off and disposal. When the decking is soft or the existing layers are already at the limit, a full tear-off and Metal Roof Replacement is the right call. We will tell you which one your roof actually needs.
Metal roofing is typically quoted per square foot, while repairs are often flat-rate, and the range depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. Steep historic roofs in Haymount, low-slope carports, and tall two-story homes in Cliffdale all price differently. Treat any figure you see as a typical range only: final pricing depends on the roof and site conditions, and we confirm it after an on-site look. Some carriers may offer premium discounts for metal or impact-rated roofs, though that is between you and your insurer.
We believe in straight numbers and no surprises. Review our pricing page for general guidance, then request a free estimate or free roof inspection so we can give you a real scope and a real number. If a repair or a coating will serve you better than a full replacement, we will recommend the cheaper option and explain why.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. We do not offer to waive, absorb, or cover deductibles, and we never frame a roof as free. What we can do is give you clear, honest evidence of what we found so you can make an informed decision.
On permits, this is general information only. In most jurisdictions, a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and thresholds, fees, and inspection requirements differ. Recovering over existing shingles is limited by code to a set number of existing layers, and historic district or HOA design review can restrict panel profile and color. Requirements vary, so always verify with the Fayetteville building or planning department before starting your project. If you have questions about the process, contact us and we will point you in the right direction.
Ready to get started? Fayetteville Metal Roofing serves in Fayetteville and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Fayetteville · Response within 24h · No commitment · ☎ (910) 748-5494
Your Free Quote Request