Serving the Fayetteville area  ·  (910) 748-5494  ·  Open Mon-Sun 7am-7pm
📞 (910) 748-5494 Free Quote

Metal Roofing in Godwin, NC (28331) · Local Professionals

Fayetteville Metal Roofing · Fast response in Godwin and the Fayetteville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+349Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Godwin is a small crossroads community where the old tobacco barns and modest homes still wear their original tin, and the sandy loam yards are shaded by longleaf pines and pecans. If you live out here off Highway 82 or near the Godwin-Falcon Road, you know the sound of rain on a metal roof, and you know when it starts to leak.

Homeowners in Godwin (28331) call Fayetteville Metal Roofing because we understand the particular wear that comes with this part of Cumberland County: hot summers, severe storms, and the occasional fallen limb. We are based in Fayetteville, just a short drive away, and we have been helping neighbors in this rural edge of the county keep their roofs tight for years.

Metal Roofing in Godwin (28331)

Godwin sits on the flat Coastal Plain edge of the Sandhills, with sandy loam soil that drains quickly but can shift under older structures. The housing stock here ranges from early 1900s farmhouses and tobacco barns with corrugated metal to more recent manufactured homes and brick ranches. Many properties have mature pines and oaks that drop needles and limbs, and the open fields mean wind can hit hard during thunderstorms. We often see failed fasteners on older tin roofs, seams that have separated after decades of thermal movement, and flashing gaps around chimneys and vents. Access can be tight on some of the smaller lots, and we plan accordingly.

Our team has worked on everything from small shed roofs to full replacements on family homes in the Godwin area. We know the local building department requirements and can help you navigate permits if needed. We also understand the importance of proper ventilation and insulation in this climate, where summer heat and humidity can shorten the life of any roof.

Our services in Godwin

How a Job Works in Godwin

Step 1: You call us at (910) 748-5494 or fill out our contact form, and we schedule a free on-site assessment. We will inspect your roof, discuss your options, and provide a written estimate. We will also check for any signs of storm damage or leaks that might not be obvious.

Step 2: Once you approve the estimate, we order materials and schedule the work. For most jobs in Godwin, we can start within a week or two, depending on weather and material availability. We handle the permit process if required by the county, and we coordinate with your schedule. On the day of installation, our crew arrives early, protects your landscaping, and works efficiently to minimize disruption. We use quality fasteners and sealants designed for metal roofs in this climate.

Step 3: After the work is done, we clean up thoroughly, removing all old materials and debris. We walk the property with you to ensure you are satisfied, and we provide a warranty on our workmanship. We do not leave until you are completely happy.

Pricing for metal roofing in Godwin varies based on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are considering a retrofit over existing shingles, that starts at $7 per square foot. Repairs, including leak fixes, start at $450, and screw replacement or re-fastening starts at $750. We also offer free estimates for storm damage inspections. Call us at (910) 748-5494 to get a precise quote for your Godwin property.

My barn off Godwin-Falcon Road has an old tin roof with rusty screws. Can you replace just the screws and seal the leaks?
Yes, we often do screw replacement and re-fastening on older metal roofs in Godwin. We use new screws with neoprene washers and apply sealant to any gaps. If the rust is extensive, we may recommend a coating or panel replacement. We will assess the condition during a free inspection.
A storm just blew some panels loose on my roof in Godwin. How quickly can you respond?
We prioritize storm damage calls in the Godwin area. Call us at (910) 748-5494 and we will schedule an inspection as soon as possible, often within 24 to 48 hours. We can tarp or secure the roof to prevent further damage and provide a repair estimate.
What is the typical cost to replace a metal roof on a 1,500 square foot home in Godwin?
For a 1,500 square foot home, a metal roof replacement typically ranges from $9,000 to $15,000, depending on the material and pitch. Standing seam may be higher. We provide free estimates so you can get an accurate price for your specific roof.
Do I need a permit to replace my roof in Godwin?
Roofing permits are generally required for replacements in Cumberland County, including Godwin. The requirements vary, so we recommend checking with the county building department. We can help you with the permit application process as part of our service.
My neighbor's tree limbs hang over my roof. Can I trim them without permission, and does my HOA have rules about roof color?
In North Carolina, you generally have the right to trim branches that overhang your property line, but it is best to talk with your neighbor first. If you are in an HOA, check the covenants for approved roof colors and materials before you choose. We can provide samples and documentation for HOA approval.
Are you fully insured for roof work in Godwin?
Yes, we carry general liability insurance and workers' compensation coverage. This protects you and your property throughout the project.
How often should I have my metal roof inspected in Godwin?
We recommend an inspection every two to three years, especially after major storms. Look for loose screws, rust spots, and debris buildup in valleys. A professional inspection can catch small issues before they become leaks. We offer free estimates for inspections.
Why choose us?

Trusted professionals in Fayetteville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Fayetteville

All your work handled by qualified professionals in Fayetteville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

349+ Verified Client Reviews in Fayetteville

⭐⭐⭐⭐⭐ 4.9/5 · 349 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Fayetteville · Response within 24h · No commitment · ☎ (910) 748-5494

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Fayetteville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm